Thermal Insulation Connectors
The Thermal Insulation Connectors Manufacturer
Xingtai Huarui Rubber and Plastic Products Co., Ltd. is a modern precision injection molding factory specializing in custom solutions. We provide a complete one-stop service, including material selection, collaborative design, mold manufacturing, and mass production. Committed to strict quality control and technological optimization, we help customers reduce costs and improve efficiency, delivering reliable, high-quality rubber and plastic products tailored to your needs.
Why choose us
Production capacity
Fully automatic production lines, supporting everything from rapid prototyping to large-scale production.Automated processes and strict quality inspection ensure that each batch of products is consistent and reliable.
Production Market
Our products are exported to the United States, Canada, Brazil, Singapore, Vietnam, Iraq, Saudi Arabia and other Middle Eastern countries, creating a bright future together.
Our service
Our sales and technical team provide detailed product information, including features, performance, and specifications. They answer your questions, offer professional technical guidance, and recommend optimal solutions tailored to your region and needs. For a hands-on experience, we also provide free 3D samples, allowing you to test and evaluate product quality before making a decision.
Selection tips and quality control
|
Application scenarios |
Recommended materials |
Key standards |
Inspection points |
|
Ship |
316L stainless steel |
IMO FTP Code Part2/5 |
Salt spray ≥720h No rust |
|
Power plant boiler |
Carbon steel + AlZn coating |
ISO15614-1 |
Weld metallography, bending test |
|
Duct/steel structure |
Aluminum 5052 |
SMACNA HVAC |
Shear ≥0.3kN |
|
Exterior wall insulation board |
Modified nylon/galvanized steel |
ETAG014 / GBT 36691 |
Pull-out, impact, freeze-thaw resistance |
|
Curtain wall keel |
A4 stainless steel |
EN1090 / GB50017 |
Pull-out ≥1.5kN |
Installing Stainless Steel Insulation Nails
Marking and Positioning
Start by marking the exact spots where you want to place each nail. Use a measuring tape and a pencil or marker to make clear marks. This step helps you keep the nails evenly spaced and ensures the insulation stays secure.
Follow these steps for accurate marking and positioning
Clean the surface again if needed. Make sure it is dry and free from dust.
Measure the area and mark the nail positions. Place marks along the edges every 6–12 inches and in the field every 12–18 inches.
For self-adhesive pins, peel off the protective film and stick the pins onto your marks. For perforated-base pins, apply adhesive to the back and press them onto the wall.
Place the insulation material over the pins. Press the insulation so the pins go through it.
Secure the insulation by placing washers on top of the pins.
Securing and Welding
After you position the Stainless Steel Insulation Nails, you need to secure them. Some projects require welding, while others use adhesive or mechanical fastening.
For adhesive-backed nails, press firmly to make sure they stick well.
For weld-type nails, use a welding tool to attach the nail base to the metal surface. Apply steady pressure and follow the recommended weld time from the manufacturer.
If you use washers, push them down until they hold the insulation tightly but do not crush it.
Stainless Steel Insulation Nails work well in harsh environments. They resist corrosion, especially if you use 316-grade stainless steel. This makes them a smart choice for outdoor or high-moisture areas. You get better durability and fewer replacements over time compared to other fasteners.
Finishing and Inspection
Once you secure all the nails, check your work carefully.
Inspect each nail to make sure it is tight and holds the insulation firmly.
Look for any loose or uneven spots in the insulation.
Trim any excess pin length with wire cutters for a neat finish.
Clean up any adhesive that may have squeezed out during installation.
Process of order
Send us Inquiry
1
>>
Get quotation
2
>>
Payment done
3
>>
Open mold and make samples
4
>>
Deliver you samples or send you pictures of samples for approval
5
>>
Mass production
6
Insulation-Piercing Technology: Allows direct connection without stripping conductor insulation.
Waterproof Sealing: Ensures moisture resistance and long-term reliability.
Corrosion-Resistant Materials: Stainless steel and UV-resistant polymer housing extend service life.
Torque-Controlled Shear Head Nut: Guarantees optimal contact pressure and prevents over-tightening.
Wide Conductor Range Compatibility
Suitable for both aluminum and copper conductors.
High Electrical and Mechanical Strength
Provides stable performance under load and vibration.
Tool-Free Maintenance
Once installed, requires no additional servicing.
Applications of Insulation Connector
Electrical Distribution
From urban grids to rural installations, IPCs are used to create lateral branches from main lines.
Street Lighting
Quick, weather-resistant connections make IPCs ideal for outdoor lighting networks.
Temporary Power Lines
Construction sites and event setups benefit from the fast, non-permanent connections IPCs offer.
Certificate
